Mould Preparation
Mould Preparation

Mould Preparation

From masking the mould to releasing it – optimise your preparation process with our adhesive tapes.



We are experts in masking tapes and our assortment features a wide variety of premium products with distinctive performance profiles. We will be happy to recommend the best product for your needs and to make your process faster.

Mould Masking

Mould Masking
Mould Masking

When specific liquids are applied to the mould – liquid release coating, in-mould gel coat, or protective paint – the paint edge or large areas outside the mould need to be masked. The mould surface, the drying temperature, the tape removal method, and many other parameters influence the choice of the optimal masking tape. Our sales specialists will recommend the right tape for ensuring quick and easy processes.

Show filters

tesa® 4309 PV1

Specifications
slightly-creped paper
natural rubber
170 µm
12 %

tesa® 4368

Specifications
slightly-creped paper
natural rubber
140 µm
10 %

tesa® 50600

Specifications
PET
silicone
80 µm
110 %

Mould Release

Mould Release
Mould Release

The idea of using adhesive tapes for mould release instead of liquid release coats is not new to wind blade producers. The goal: reduce the time needed to prepare the mould for the next blade.

Since the use of common PTFE tapes for this application is limited due to inferior quality, we have developed tesa® 4800, a new blue premium tape for mould release. It is ideal for edge sealing, crack cover and full-surface masking in secondary moulds. Test it and see for yourself!

Product features:

  • Good handling during application

  • Withstand a high number of cycles

  • Clean removal after use

read more