tesa_04302_pr_002

Product information

tesa® 4302

High performance paper masking tape up to 160 °C



Product description

tesa® 4302 is a finely crêped and conformable paper masking tape, especially suitable for the highest requirements of automotive paintwork (water- or solvent based paints) followed by oven-drying.

Paints and even critical filler systems adhere to the backing avoiding any kind of flaking.

tesa® 4302 can be removed from rubber, glass and paint without tearing or leaving adhesive residues even for cold removal after high heat cycles.

Due to its finely crêped structure, this tape guarantees a sharp edged finish.

tesa_04302_pr_002
tesa_04302_pr_002

Technical properties

Backing material

slightly-creped paper

Total thickness

170 µm

Type of adhesive

natural rubber

Adhesion to steel

4 N/cm

Elongation at break

10 %

Tensile strength

46 N/cm

Temperature resistance

160 °C

Rating properties

Hand tearability

++

Easy to remove

yes

Paint anchorage

++

Sharp colour edge

+

Conformability

+

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads