Product Construction
| Backing material | Acrylic-coated cloth |
| Total thickness | 280 µm |
| Type of adhesive | type: natural rubber |
tesa® 4671
Acrylic coated cloured duct tape
Sustainable Aspects
- 51% bio-based carbon content in total product (tested acc. to ASTM D6866-21 Method B)
Product description
tesa® 4671 is a strong acrylic paste coated cloth tape. It is based on a 120 mesh woven rayon fabric backing and a natural rubber adhesive.
tesa® 4671 is a strong cloth tape for almost every application.
Features:
- high adhesion even on rough surfaces
- excellent tensile strength
- easy to write on
- conformable
- easy to remove without residues
- no unpleasant odour
- less reflective surface
- available in 6 colours: black, white, grey, red, blue, and green
Product details and specifications
Application Fields
- Indoor and outdoor applications
- Bundling and reinforcing of heavy pipes
- Suitable for several applications in the event sector
- Fixing of carpets during exhibitions
- Floor marking
- Covering sharp edges
Sustainable Aspects
- 51% bio-based carbon content in total product (tested acc. to ASTM D6866-21 Method B)
Product Construction
| Backing material | Acrylic-coated cloth |
| Total thickness | 280 µm |
| Type of adhesive | type: natural rubber |
Properties / Performance Values
| Suitable for die cutting | yes |
| Abrasion resistance | very good |
| Temperature resistance (30 min) | 140 °C |
| Elongation at break | 9 % |
| Tensile strength | 70 N/cm |
| Straight tear edges | very good |
| Easy to write on | yes |
| Hand tearability | very good |
| Temperature resistance (removability from aluminum after 30 min exposure) | 140 °C |
| Mesh | 120 threads/inch² |
| Water resistance | good |
Properties / Performance Values
| Suitable for die cutting | yes |
| Abrasion resistance | very good |
| Temperature resistance (30 min) | 140 °C |
| Elongation at break | 9 % |
| Tensile strength | 70 N/cm |
| Straight tear edges | very good |
| Easy to write on | yes |
| Hand tearability | very good |
| Temperature resistance (removability from aluminum after 30 min exposure) | 140 °C |
| Mesh | 120 threads/inch² |
| Water resistance | good |
Adhesion to Values
| Adhesion to steel | 3.8 N/cm |
Adhesion to Values
| Adhesion to steel | 3.8 N/cm |
Additional Info
Recommendation: please conduct a test on the application surface before using the product.
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
