Product information

tesa® 50533

High adhesion temporary protection tape for freshly painted surfaces

Product description

tesa® 50533 consists of an UV-stabilised backing coated with a high adhesion EVA adhesive.
User benefits:

  • Preserves the paint finish, up to 6 months storage outdoors
  • Perfect adhesive to the range of the paint finish, even during transportation (tested at speeds higher than 160 km/h – 100 mph)
  • Easy disposal. Both, the film and the adhesive systems are environmentally friendly

Main applications

  • 50533 provides effectively peeling off protection for filmic systems like tesa® 50530 especially in areas of difficult geometries and prevents infiltration by dust and humidity
  • tesa® 50533 is suitable for die-cutting and can be printed to be used as security, steering or marking


  • 50533 can also be used as base material for heavy duty protection pads for bumpers and door edges

Technical properties

Backing material

polyolefinic film

Total thickness

96 µm

Type of adhesive


Adhesion to steel

3 N/cm

Elongation at break

660 %

Tensile strength

21.5 N/cm


52 weeks

Rating properties

Easy to remove


Suitable for die cutting


Paint compatibility


Resistance to chemicals


tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.


Related products