tesa_single-sided_red_spool_pr_001

Product information

tesa® 51235

Robust tear tape with co-extruded backing



Product description

tesa® 51235 is a self-adhesive tensilised polypropylene tear strip with a synthetic rubber adhesive system.
Due to a co-extruded PP/PE backing tesa® 51235 exhibits an excellent and unique tear performance despite it's relatively low thickness. Additionally the elastic component in the special PP-film allows an angled tear as well.
tesa® 51235 with a low and highly constant unwinding power is recommended for fast unwinding on all common dispensers in an automatic industrial application process.
The PE layer of the backing works as a shield which protects the PP layer of the tear strip against possible negative influences of the box manufacturing process

Main applications

  • tear of packaging made of medium and heavy grades of solid cardboard
  • tear of packaging made of two-ply corrugated board
tesa_single-sided_red_spool_pr_001
tesa_single-sided_red_spool_pr_001

Technical properties

Backing material

MOPP

Total thickness

111 µm

Type of adhesive

synthetic rubber

Adhesion to steel

5.5 N/cm

Elongation at break

40 %

Tensile strength

180 N/cm

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads

Related products