52916 [Country PI: ek]
[Country PI: ek]
PDF – 42.4 kB
tesa® 52916 is specially designed for mounting photopolymer plates (1.14mm [0.045"] or 1.70mm [0.067"]) on compressible (foam) sleeves. It is a double-sided tape with a differential adhesive.
High open side adhesion ensures a secure bond when applying directly to the foam coated sleeve.
The tailored adhesion on the plate side guarantees that plates can be repositioned and demounted easily, but are held securely during printing.
Due to its minimal thickness, the polyester film backing provides the ideal carrier between both print plate and sleeve. This eliminates any interference, allowing the sleeve to compress and recover freely whilst printing.
tesa® 52916 is specially designed for mounting photopolymer plates (1.14mm [0.045"] or 1.70mm [0.067"]) on compressible (foam) sleeves.
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.