Laser Label,Security Labeling, white, color change

Product information

tesa® 6931 Laser-Label

Color-Change marking



Product description

tesa® 6931 is a brittle acrylic film. Marking and cutting are achieved by laser in one step, which makes it possible to realize any desirable label variation and format using only one material. The backing is highly resistant against chemicals, abrasion, temperature and ageing. The adhesive system consists of a resin modified acrylic suitable even for low energy surfaces.

This high performance product is used as a tamper evident identification label over the entire lifetime of a product and also as a data carrier system for intelligent in-process steering. Marking is achieved by laser-activated color pigments embedded in the backing.

Colour: white and transparent

Main applications

  • Precise and resistant marking
  • Very resistant to heat, abrasion and chemicals
  • Tamper Evident: Manipulation leaves visible trace
  • Not removeable without destruction of the label
  • Flexible formatting and label design: marking and cutting by the laser
  • Efficient: replaces a multitude of pre-made labels
  • Just-in-time production reduces storage needs
  • High marking speed in conjunction with high-speed laser hardware
Laser Label,Security Labeling, white, color change
Laser Label,Security Labeling, transparent, color change
Laser Label,Security Labeling, white, color change
Laser Label,Security Labeling, transparent, color change

Technical properties

Backing material

acrylic

Tamper Evidence

yes

Peel off force from liner

2-6 cN/cm

Thickness of tape

100 µm

Type of adhesive

acrylic

Adhesive weight

25 g/m²

Adhesion to Steel >

1.8 N/cm

Type of liner

coated paper

Weight of liner

65 g/m²

Shelf life time

24 months

Rating properties

Printability

+

Temperature resistance short term

270 °C

Temperature resistance long term

120 °C

Ageing resistance (UV)

++

Frost resistance

-50 °C

Humidity resistance

++

Resistance to chemicals

++

Suitable Laser

Nd:YAG

Storage conditions

23°C, 50% RH, stored in original box

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads

Related products