tesa_52022_pr_001_fullsize

Product information

tesa Softprint® 52222 PV1 Sleeve Master

Foam plate mounting tape (soft) for screen print & combination work



Product description

tesa® 52222 Softprint Sleeve Master is a double-coated foam tape, designed specifically for mounting thin photopolymer plates of thickness 1.14mm (0.045") or 1.70mm (0.067") in wide-web film and paper flexographic printing, on machines with sleeve technology.

The soft foam makes this the ideal solution for screen printing with some combination work.

Foam properties:

  • Highly compressible foam, with superior recovery for excellent print quality
  • Long lasting recovery characteristics for extended and high speed print runs
  • Low thickness tolerances for quick print preparation and reduced waste


Adhesive properties:

  • Tailored adhesion on open side to sleeve to avoid plate movement
  • Sufficient bonding to plate to avoid edge lifting or plate movement
  • Non increasing, controlled bonding power for easy repositioning and especially for easy demounting of thinner plates
  • Very cohesive adhesive structure for demounting without adhesive residues


Additional properties:

  • The structured PP-liner prevents the formation of air pockets when plate mounting
  • Red colour marking indicates the soft foam

Main applications

tesa® 52222 Softprint Sleeve Master is a 500µm (20 mil) double-coated foam tape, designed specifically for mounting thin photopolymer plates of thickness 1.14mm (0.045") or 1.70mm (0.067") in wide-web film and paper flexographic printing, on machines with sleeve technology.

tesa_52022_pr_001_fullsize
tesa_Softprint_52022_pr_001_fullsize
tesa_52022_pr_001_fullsize
tesa_Softprint_52022_pr_001_fullsize

Technical properties

Backing material

PE foam

Thickness category

500 µm

Type of adhesive

tackified acrylic

Type of liner

PP

Hardness

soft

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads